Are you a Dealer? Log in to view your open & recent orders.

Cancel
Forgot password?

Pallet Rack Enclosures

WireCrafters Pallet Rack Enclosures
Prevent Inventory Shrinkage
Existing pallet racks can be completely enclosed with our standard wire mesh panels and doors to secure and control high value inventory.
Offest Clips
We stock three different mounting clips that allow an offset which ranges from flush mount (or no offset) up to 6".
48 Hour Quick Ship
Stock panels are ready to ship within 48 hours of receiving your order.

Pallet Rack Enclosures Secure Inventory

Secure inventory and the contents of existing pallet racks while preventing inventory shrinkage with WireCrafters Pallet Rack Enclosures. Security officers and loss prevention specialists prefer WireCrafters Style 840 Partitions for securing valuable items in bulk storage or on pallet racks. Existing facility pallet racks can be completely enclosed with standard wire mesh panels and doors to secure and control high value inventory. Modular sized wire mesh panels are quick to install and are inherently stronger than competing pallet rack enclosing systems.

WireCrafters Pallet Rack Enclosures will control access and help prevent theft of your high value inventory items. A complete pallet rack enclosure consists of wire mesh panels on the back, ends, and top of the rack, with access doors on the front side.

Pallet Rack Enclosure Specifications & Details

Secure inventory and the contents of existing pallet racks while preventing inventory shrinkage.

WireCrafters panels and doors are made of 10 gauge wire welded in a 2" x 2" square mesh. The wire mesh is then welded into a 13 gauge rolled formed angle frame. Pallet rack enclosure end panels are attached to the pallet rack end with flush mount angle clips. To separate multiple bays, end panels are manufactured with a flat frame which allows the panels to be attached to the pallet rack end with self tapping screws. Back panels are also attached directly to the rack with angle clips. WireCrafters stocks three different mounting clips that allow an offset which ranges from flush mount (or no offset) up to 6". These mounting clips allow your pallet load to overhang but still maintain inventory security and safety for workers. Offset clips come in lengths up to 12" long which allows you to mount panels between back-to-back rows of pallet racks, providing a strong and secure wall to two rows of rack simultaneously.

WireCrafters manufactures enclosure panels the same width as your beam which gives your facility optimal security for your products and inventory stored on existing pallet racks.

Secure Inventory with Pallet Rack Enclosure Doors

Any bay of an existing pallet rack can be turned into a secure storage area.

In order to convert existing pallet racks into a secure storage enclosure, doors are required for the front. Any bay of an existing pallet rack can be turned into a secure storage area. WireCrafters stocks double hinge doors that are 8'-0" wide in 8'-0" and 10'-0" heights. These double-hinge doors bolt directly to the rack uprights with simple hand tools. The enclosure doors come equipped with a padlock lug. WireCrafters can manufacture double-hinge doors up to 12'-0" wide x 20'-0" high. On oversized doors, we provide our own door posts that are attached directly to the rack uprights in the field.

Sliding doors may be the most popular type of pallet rack enclosure door. Sliding doors also mount directly to the pallet rack uprights, and are sized from 8'-0" x 8'-0" up to 12'-0" x 20'-0" high. When multiple bays of pallet racks are side by side, these sliding doors mount on a double track system and allow one door to slide out of the way in front of the other door. Unlike double hinge doors, sliding doors use minimal aisle space and are ideal for areas with smaller aisle clearance.

Control Inventory & Prevent Theft

Let WireCrafters help secure and control your inventory with our Pallet Rack Enclosures. Free design and layout assistance is available. Call us today at 800-924-9473.

  • Standard sized panels 4'-0" or 5'-0" high, match beam length in width.
  • Panels made of 2" x 2" x 10 gauge welded wire mesh-other meshes available.
  • Panels are framed in 1 1/4" x 1 1/4" x 13 gauge steel angle.
  • Panels attach directly to rack with mounting brackets.
  • Multiple mounting points (seven) on ends of each panel.
  • Stack panels one on top of the other to reach desired height.
  • Access racks via double sliding doors, or double hinged doors.
  • "Above the Top" mounting allows panels to extend above top rack beam.
  • Welded wire construction allows for field modifications that look factory-finished.
  • Panels can be mounted to support posts if stand alone system desired.
  • Heavier options available.
  • Panels

    Rack Enclosure panels are made of 2" x 2" x 10 gauge welded wire mesh framed in 1 1/4" x 1 1/4" x 13 gauge steel angle. Panels are either 4'-0" or 5'-0" tall by 1'-0" to 12'-0" wide. Stack two or more panels to reach full rack height. Panels can be mounted directly on the rack, or to posts if a stand alone system is desired. Panels may be installed above the top rack beam with our extension kit, or top panels may be added to fully enclose the rack system.

  • Doors

    Rack Enclosure doors are made of the same materials as the panels. Choose from sliding or hinged type doors. Doors can be mounted directly to the rack, or in some instances mounted on posts installed adjacent to the rack. Many stock and custom sizes are available.

  • Options

    WireCrafters stocks many different styles and types of mesh should your enclosure require heavier duty or tighter control than our standard 2" x 2" mesh provides. Review our Special Mesh page for details. Standard enclosure color is gray; see our Finish & Color options for available alternatives.
  • Panels

    Shall be constructed of 2" x 2" x 10 gauge welded wire mesh completely framed in 1 1/4" x 1 1/4" x 13 gauge steel angle.

  • Hinged Doors

    Shall be constructed of the same mesh as the panels, completely framed in 1 1/4" x 1 1/4" x 13 gauge steel angle, two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from door center to the corner securely welded in place. Hinged doors shall be equipped with padlock lugs, three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.

  • Sliding Doors

    Shall be constructed of the same mesh as the panels, completely framed in 1 1/4" x 1 1/4" x 13 gauge steel angle, two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center of door to door top or bottom, securely welded in place. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1 7/8" x 2 3/8" door track, pad lock lugs, and door keeper assembly.
  • Posts

    Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with pilot holes to accept self tapping screws for mounting panels.

  • Hardware

    All hardware needed for installation, including floor anchors shall be plated and are furnished as standard.

  • Finish

    Powder Coat Gray. Touch up paint included with each shipment. View other available Color Options
WireCrafters logo ×Close
Finishes & Colors

Unless otherwise specified by the customer or by the stock finish description on our website, all WireCrafters products receive one coat of gray (standard) liquid enamel.

Stock Colors

WireCrafters maintains stock of the optional colors shown. All colors are available in traditional liquid enamel or an optional powder coat finish. Touch up paint is provided with all orders (other than custom powder coat colors).


Custom Colors

Custom matched colors require the submission of a one inch square (or larger) paint chip with order, and require an additional charge. (RAL standard color number may be submitted in lieu of paint chip.) Touch up paint is provided with all orders. Custom match colors may extend delivery time. Please contact WireCrafters customer service for additional information.


Optional Finishes
  • Powder Coat
  • Galvanized
  • Plain Steel
  • Brushed (Stainless Steel)
  • Electro Polished (Stainless Steel)

WireCrafters Product Finishes and Color Samples

*Note: The colors displayed on this website show the variety of optional colors kept in stock. Users should not place orders based on the colors as reproduced on their computer screens as these may vary from the actual color. Please request a printed WireCrafters Color Chart before making a color selection.

WireCrafters logo
Please Upgrade Your Browser

Your browser is out of date and can not correctly display all features of this and other websites. It's time to Get a Better Browser!


As a result, you'll encounter more and more problems as time goes by - problems that are caused not by the websites you are visiting, but by the browser you are using. We strongly advise you to upgrade to one of the browsers listed below in order to keep your computer secure, and so that you may experience our site as it was designed to function.


If you choose to close this alert and continue, you will likely have trouble viewing and navigating our site as intended.

×Close
View Mobile Site

View the mobile version at m.wirecrafters.com (even if you are not using a mobile device).


Get a Better Browser

We recommend using one of the Internet Browsers below, or upgrading your current browser to the most recent version.



 

Questions? Contact us at info@wirecrafters.com or toll free at 800-924-9473.

WireCrafters logo ×Close
Sign Up for Email Updates

Please fill out your contact information below to receive product announcements, trade show information, and new products and services from WireCrafters.


Don't worry, we won't share your information or fill up your inbox.



Questions? Contact us at info@wirecrafters.com or toll free at 800-924-9473.


WireCrafters logo ×Close
Forgot Password Assistance

Enter your email address and we'll send your password to your inbox.



Questions? Call us at 800-924-9473.