Residential Tenant Storage Lockers, Wire Storage Locker

All Steel Welded Wire Tenant Storage Lockers

WireCrafters' RapidWire line of all steel welded wire tenant storage lockers are an ideal way to secure resident's personal items in multi-family building common storage areas. WireCrafters' welded mesh locker construction is strong and secure, and gives installers more flexibility to custom fit and professionally finish storage areas, while eliminating clutter and efficiently utilizing available space.

Storage Lockers Made Simple & Secure

WireCrafters' tenant storage lockers are made of 10 gauge wire in a 2" x 2" square welded wire mesh. This mesh is welded into a 1-1/4" x 1-1/4" x 13 gauge rolled formed angle. The storage locker's open but secure design allows existing lighting, ventilation, and fire suppression systems to function effectively throughout the secured storage areas.

RapidWire Tenant Storage Lockers - 2 Styles

WireCrafters' tenant storage lockers are available in two basic styles; single tier walk-in, and double tier storage locker. The most common configuration is the single tier walk-in type storage locker with doors 3'0" and 4'0" wide, with a depth of 3'0", 4'0", and 5'0" deep. The standard height of the storage lockers is 7'6" high. The single tier storage locker gives the tenant plenty of storage space for their out-of-season belongings. The double tier lockers are typically used when the building has limited space but a large number of tenants who require additional storage. The width and depth of the double tier storage lockers are the same, but the height of each individual locker is 3'9" high, for a combined total height of 7'6".

RapidWire tenant storage lockers come standard with a simple padlock lug and the tenant provides their own padlock. A three point lock with a built-in keyed cylinder is also available.

Additional Options Available for Storage Lockers

The standard storage locker consists of the front door panel and side walls. There are other components that may be required.

• Ceiling Panels

  Ceiling panels are available if the locker is more than 6" away from the existing ceiling. These welded wire ceiling panels allow light and ventilation to come through while providing additional security for the lockers.

• Back Panels

  Back panels made of solid 16 gauge sheet metal or welded wire back panels are also available for those lockers that are back to back in the middle of a room. You may also require a back panel when your existing wall is not level or has obstructions on it.

• Shelves

  Full and half shelves made of 16 gauge solid sheet metal can be added to lockers for storage of smaller items that may be better stored away from the floor.

• Bottom or Floor Panels

  Bottom or floor panels can also be added to the lockers. A solid 16 gauge sheet metal bottom panel can keep items 3" above the floor for those areas where water could be a potential problem.

Designed for On-Site Flexibility

RapidWire tenant storage lockers with their modular design make it easy to layout and install your storage locker project. Doors are pre-hung, hinges are already welded in place, and it takes just four bolts to connect a wall panel to a door panel. This assures easy installation and provides for the lowest total cost of ownership. Welded wire may be modified in the field; making installations around obstructions like electrical conduits, heating ducts, and water pipes easy. Because the wire is welded at every intersection, field modification does not affect the structural integrity of the storage lockers or panels.

Free design and layout assistance available. Call 800-924-9473